![]() The only categories listed are 'Internet Connection', TCP/IP and DHCP. I have the latest Time Capsule bought this summer and can't seem to find the NAT tab that should be in the Internet section. Otherwise you have to ask yourself if you'd be better off with a dedicated internet-enabled NAS - something that should work with any router and offer access from any computer. I'm trying to enable the Back to My Mac feature and when doing so, I get a warning that BtMM may be slow since NAT-PMP or UPnP is turned off on my router. ![]() If you're a diehard Mac user who can live with the Time Capsule's limitations and have a compatible router/modem, you could find the Mobileme features handy - especially as they remove the need to mess around with features such as Dynamic DNS. MiniUPnPd is a small daemon which can be installed on a NAT router to provide UPnP Internet Gateway Device and Port Mapping Protocol services, enabling clients on the LAN to ask for port redirections. Setting wireless options in Apple's Airport Utility UPnP and NAT-PMP daemon for gateway routers. If it says "Back to My Mac isn't working properly because it requires a router that supports NAT- PMP and uPNP", and you can't fix this by tweaking the settings in your router even though it features uPNP, chances are the Time Capsule's Mobileme features won't work for you.Ī possible work around is use your router/modem as a modem only in bridge mode, which could create problems if you're relying on the router to provide other services such as VoIP. Even if your router is uPNP compatible there's a big chance if won't work, you'll find a list of compatible routers here.Īs a quick compatibility test, click on the Back to My Mac tab in the Mobileme preferences panel on your Mac. If your Time Capsule is plugged into a combination router/DSL modem (such as the Billion routers popular with many Australian ISPs), the remote access features probably won't work. You don't need to work about things like Dynamic DNS, as Mobileme takes care of all this. The port-assignment-nat-traversal-technique field is nat-pmp or upnp for a NAT-originated name, or f for a local interface name (i.e., built from the results of interface-ip-addresses ). The protocol, address, and port together form a name that can be used by remote peers to contact the socket. After following the advice of another question I realised the router/network doesn't support NAT-PMP/UPnP and thus I get to configure the time capsule as available through icloud, but I'm never able to reach it outside of the network. Record of a particular name for a socket. It does not seem to explicitly state that routers on both ends must support UPnP or NAT-PMP. I am trying to reach the time capsule on a remote network. If you've also entered your Mobileme login details in the Mobile preferences panel on your Leopard Mac, whenever you access the internet away from home the Time Capsule should appear in the Finder as an attached device. The Apple knowledge base article on setting up Back To My Mac lists an 'AirPort base station (AirPort Extreme, AirPort Express, or AirPort Time Capsule) or other Internet router that supports UPnP or NAT-PMP' as one of the requirements.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |